Bronze Boiler Valves

SUPPLIED WITH IBR TEST CERTIFICATE IN FORM III-C, ISSUED BY THE CHIEF INSPECTOR OF BOILERS, WEST BENGAL

BRONZE HORIZONTAL LIFT CHECK VALVES

  • Figure No. : 9000
  • Sizes : 15 mm - 50 mm
  • Description : Bronze lift type Check/Non-return Valve screwed bonnet and screwed end valves are supplied generally with BSP parallel threads for steam. The renewable body, seat and value will be made of stainless steel AISI-410.
  • Materials :The body & bonnet will be made from Bronze conforming IBR 282(a) (IV) Grade-B.
  • Test Certificate : The valves are hydraulically tested to 35 kg. / cm2 (500 lbs PSIG) and are suitable for maximum working pressure of 17.5 kg. / cm2 (250 PSIG) and temperature upto 4280 F (2200 C), The IBR Test Certificate in FORM III-C issued by the Chief Inspector of Boilers, West Bengal will be furnished with the materials.

 

BRONZE HORIZONTAL LIFT CHECK VALVES

  • Figure No. : 9005
  • Sizes : 15 mm - 50 mm
  • Description : Bronze lift type Check/Non-return Valve screwed bonnet and flanges as per B.S. 10 Table-H for steam. The renewable body, seat and value will be made of stainless steel AISI-410.
  • Materials : The body & bonnet will be made from Bronze conforming to IBR 282 (a) (IV) Grade-B.
  • Test Certificate : The valves are hydraulically tested to 35 kg. / cm2 (500 lbs PSIG) and are suitable for maximum working pressure of 17.5 kg. / cm2 (250 PSIG) and temperature upto 4280 F (2200 C), The IBR Test Certificate in FORM III-C issued by the Chief Inspector of Boilers, West Bengal will be furnished with the materials.

BRONZE STEAM STOP VALVES

  • Figure No. : 9100
  • Sizes : 15 mm - 50 mm
  • Description : Bronze Globe Steam Stop Valve screwed bonnet inside screwed rising to be operated by handwheel. the value will have screwed female ends as per BSP parallel thread. The renewable body seat, valve and spindle will be made of stainless steel AISI-410. The valves have back seat provision so that the gland can be re-packed even if the valve is fully open.
  • Materials : The body & bonnet will be made from Bronze conforming IBR 282 (a) (IV) Grade-B.
  • Test Certificate : The valves are hydraulically tested to 35 kg. / cm2 (500 lbs PSIG) and are suitable for maximum working pressure of 17.5 kg. / cm2 (250 PSIG) and temperature upto 4280 F (2200 C), The IBR Test Certificate in FORM III-C issued by the Chief Inspector of Boilers, West Bengal will be furnished with the materials.

BRONZE STEAM STOP VALVES

  • Figure No. : 9104
  • Sizes : 15 mm - 50 mm
  • Description : Bronze Globe Steam Stop Valve screwed bonnet having inside screwed rising spindle to be operated by handwheel. Flanges as per BS 10 Table 'H'. The renewable body seat, valve and spindle will be made of stainless steel AISI-410. The valves have back seat provision so that the gland can be re-packed even if the valve is fully open.
  • Materials : The body & bonnet will be made from Bronze conforming IBR 282 (a) (IV) Grade-B
  • Test Certificate : The valves are hydraulically tested to 35 kg. / cm2 (500 lbs PSIG) and are suitable for maximum working pressure of 17.5 kg. / cm2 (250 PSIG) and temperature upto 4280 F (2200 C), The IBR Test Certificate in FORM III-C issued by the Chief Inspector of Boilers, West Bengal will be furnished with the materials.

BRONZE SLEEVE PACKED WATER GAUGES

  • Figure No. : Hand of Set
  • 9093             LH
  • 9094             RH

 

Note : Apart from displayed pictures and items, we also manufacture the items as fusible plug, 'Y'-type, pot-type, duplex stainer, and blowdown valve etc., for which we are unable to put the picture, besides above displayed and mentioned items. If you require any more item, please conact us.